user manualFridge-FreezerFI22/10NFA
InstallationRead the "Safety Information" carefullyfor your safety and correct operation ofthe appliance before installing theappliance.Posi
Ventilation requirementsThe airflow behind the appliance must besufficient.min.200 cm250 - min. 200 cm2Installing the applianceCaution! Make sure that
I4. Push the sealing strip between the ap-pliance and the adjacent cabinet.5. Remove the correct part from the hingecover (E). Make sure to remove the
HaHbHcHd9. Install the part Ha on the inner side of thekitchen furniture.ca. 50 mmca. 50 mm21 mm90° 90° 21 mm10. Push the part Hc on the p
Hb14. Press the part Hd on the part Hb.HbHdDo a final check to make sure that:• All screws are tightened.• The magnetic sealing strip is attachedtight
electrolux 15
212713191-28102009www.electrolux.com
Electrolux. Thinking of you.Share more of our thinking at www.electrolux.comContentsSafety information 2Control panel 4First use 4Daily use
• It is dangerous to alter the specifications ormodify this product in any way. Any dam-age to the cord may cause a short-circuit,fire and/or electric
by a qualified electrician or competent per-son.• This product must be serviced by an au-thorized Service Centre, and only genuinespare parts must be
Important! Do not use detergents or abra-sive powders, as these will damage the fin-ish.Daily useFreezing fresh foodThe freezer compartment is suitabl
gradually pull the shelf in the direction of thearrows until it comes free, then reposition asrequired.Helpful hints and tipsHints for energy saving•
• make sure that the commercially frozenfoodstuffs were adequately stored by theretailer;• be sure that frozen foodstuffs are transfer-red from the fo
•disconnect the appliance from elec-tricity supply• remove all food•defrost 4)and clean the appliance and allaccessories• leave the door/doors ajar to
Problem Possible cause Solution The door is not closed correctly. Refer to "Closing the door". The product temperature is toohigh.Let the
Comments to this Manuals