Rex-Electrolux FI243FA User Manual

user manualFridgeFI 243 FA

InstallationPositioningInstall this appliance at a location where theambient temperature corresponds to the cli-mate class indicated on the rating pla

min.200 cm2min.200 cm2Installing the applianceCaution! Make sure that the mainscable can move freely.Do the following steps:1. Install the appliance i

5. Remove the correct part from the hingecover (E). Make sure to remove the partDX, in the case of right hinge, SX in op-posite case.6. Attach the cov

Put together the appliance door and thefurniture door and mark the holes.HaHb8 mm11. Remove the brackets and mark a dis-tance of 8 mm from the outer e

Reversibility of the freezer door180˚Environmental concernsThe symbol on the product or on itspackaging indicates that this product maynot be trea

electrolux 15

212714151-00-13112009www.electrolux.com

Electrolux. Thinking of you.Share more of our thinking at www.electrolux.comContentsSafety information 2Operation 4First use 4Daily use 4H

• It is dangerous to alter the specifications ormodify this product in any way. Any dam-age to the cord may cause a short-circuit,fire and/or electric

by a qualified electrician or competent per-son.• This product must be serviced by an au-thorized Service Centre, and only genuinespare parts must be

Important! In the event of accidentaldefrosting, for example due to a powerfailure, if the power has been off for longerthan the value shown in the te

Hints for refrigerationUseful hints:Meat (all types) : wrap in polythene bags andplace on the glass shelf above the vegetabledrawer.For safety, store

Many proprietary kitchen surface cleanerscontain chemicals that can attack/damagethe plastics used in this appliance. For thisreason it is recommended

Important! There are some sounds duringnormal use (compressor, refrigerantcirculation).Problem Possible cause SolutionThe appliance does notoperate. T

Problem Possible cause Solution The door is not closed correctly. Refer to "Closing the door". The temperature regulator is notset correct