user manualFridge-FreezerFI18/10A
Problem Possible cause SolutionThe temperature in the re-frigerator is too high.There is no cold air circulation inthe appliance.Make sure that there
PositioningInstall this appliance at a location where theambient temperature corresponds to the cli-mate class indicated on the rating plate ofthe app
Ventilation requirementsThe airflow behind the appliance must besufficient.min.200 cm250 - min. 200 cm2Installing the applianceCaution! Make sure that
I4. Push the sealing strip between the ap-pliance and the adjacent cabinet.5. Remove the correct part from the hingecover (E). Make sure to remove the
HaHbHcHd9. Install the part Ha on the inner side ofthe kitchen furniture.ca. 50 mmca. 50 mm21 mm90° 90° 21 mm10. Push the part Hc on the p
Hb14. Press the part Hd on the part Hb.HbHdDo a final check to make sure that:• All screws are tightened.• The magnetic sealing strip is attachedtight
212721051-00-11052010 www.electrolux.com/shop
Electrolux. Thinking of you.Share more of our thinking at www.electrolux.comCONTENTSSafety information 2Operation 4First use 4Daily use 4H
damage to the cord may cause a short-circuit, fire and/or electric shock.Warning! Any electrical component(power cord, plug, compressor) mustbe replac
Service• Any electrical work required to do the serv-icing of the appliance should be carriedout by a qualified electrician or compe-tent person.• Thi
Place the fresh food to be frozen on the topcompartment.Storage of frozen foodWhen first starting-up or after a period outof use, before putting the p
HELPFUL HINTS AND TIPSHints for energy saving• Do not open the door frequently or leaveit open longer than absolutely necessary.• If the ambient tempe
• do not allow fresh, unfrozen food totouch food which is already frozen, thusavoiding a rise in temperature of the latter;• lean foods store better a
Defrosting the freezerA certain amount of frost will always formon the freezer shelves and around the topcompartment.Defrost the freezer when the fros
WHAT TO DO IF…Warning! Before troubleshooting,disconnect the mains plug from themains socket.Only a qualified electrician or compe-tent person must do
Comments to this Manuals