Rex-Electrolux FI290SA User Manual

user manualFridge-FreezerFI290/2TAFI290SA

TECHNICAL DATA Dimension of the recess Height 1580 mm Width 560 mm Depth 550 mmRising Time 20 hThe technical information are situated in

On the opposite side:1. Tighten the lower pin.2. Install the lower door.3. Tighten the middle hinge.4. Install the spacer.5. Install the upper door.6.

between the appliance and the kitchenfurniture is correct.Open the door. Put the lower hinge cov-er in position.44mm4mm3. Attach the appliance to the

7. If the appliance must connect laterallyto the kitchen furniture door:a) Loosen the screws of the part (G)and move the part (G).b) Tighten the screw

12. Remove the brackets and mark a dis-tance of 8 mm from the outer edge ofthe door where the nail must be fitted (K).HaK8 mm13. Place the small squar

product is disposed of correctly, you willhelp prevent potential negativeconsequences for the environment andhuman health, which could otherwise becau

212714172-00-11052010 www.electrolux.com/shop

Electrolux. Thinking of you.Share more of our thinking at www.electrolux.comCONTENTSSafety information 2Operation 4First use 4Daily use 4H

damage to the cord may cause a short-circuit, fire and/or electric shock.Warning! Any electrical component(power cord, plug, compressor) mustbe replac

Service• Any electrical work required to do the serv-icing of the appliance should be carriedout by a qualified electrician or compe-tent person.• Thi

Storage of frozen foodWhen first starting-up or after a period outof use, before putting the products in thecompartment let the appliance run at least

HELPFUL HINTS AND TIPSHints for energy saving• Do not open the door frequently or leaveit open longer than absolutely necessary.• If the ambient tempe

charging must therefore only be carriedout by authorized technicians.Periodic cleaningThe equipment has to be cleaned regularly:• clean the inside and

Periods of non-operationWhen the appliance is not in use for long pe-riods, take the following precautions:• disconnect the appliance from elec-tricit

Problem Possible cause SolutionThe temperature in theappliance is too high.The temperature regulator is notset correctly.Set a lower temperature. The